TXgard Plus Gift- und Sauerstoffgasdetektor

TXgard Plus ist ein flammensicherer,(Ex d), ATEX, IECEx zertifizierter, Gift- und Sauerstoffgasdetektor mit LCD-Display. Specifications Size 200 x 115 x 115mm (7.9 x 6.1 x 6.1ins) Weight 2.2kg (4.9lbs) Ingress protection IP65 Enclosure material Junction box: Marine grade alloy Sensor housing: 316 stainless steel Power 10-30Vdc, 210mA max (relay version) 160mA max (non relay) Cable entries 2 x M20 or 1/2” NPT Operating temperature -10°C to +55°C (-14°F to 131°F) * Humidity 15 to 90% RH non-condensing Relays (optional) SPNO or SPNC contacts rated 30Vdc 1A (non-inductive load) for Alarm 1, Alarm 2, Fault Display 3-digit LCD back-lit display, LED status indicator Calibration method Via magnetically operated buttons Electrical output 3 wire 4-20mA, sink or source Terminals Suitable for up to 1.5mm2 cable Sensor type Electrochemical Repeatability +/- 2% FSD typically Zero drift +/- 2% FSD, 6 months typically Response time Contact Crowcon for a full list of sensor response times Performance Tested in accordance with EN60079-29-1 Hazardous area zones Zone 1 or 2 Approvals Ex II 2 G Ex db IIC T6 Tamb -20°C to +55°C EMC compliance EN 50270, FCC: CFR 47 Part 15, ICES-003 * Figures shown exclude the sensors – Please contact Crowcon for a full list of sensor operating temperatures Gases and Ranges Gas Range Available Carbon monoxide (CO) 100, 250, 500, 1000ppm Hydrogen sulphide (H2S) 25, 50, 100, 200ppm Oxygen (O2) 25% vol.